2024 VENTUM Mute V1 - Advanced Series . Pre Orders Shipping Early Sept2024!

Big-Air

Silence the noise and amplify the excitement with the Mute as your wingman, conquering the skies one thrilling trick at a time.
Designed to showcase jaw-dropping aerial tricks and maneuvers with unmatched precision and control.

The Mute provides you the confidence, you provide the guts and skills.

Kite Type – The Mute is a 5-strut kite. Medium/High AR with an open arc. This kite is designed to offer the ultimate big air experience.  Fast, Agile, direct, loops, boost and floats.

Rider Level –  Suitable for beginners, intermediate & advanced riders.

Rider styles – Big Air

Sizes – 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 

A Backpack, compression bag, multipurpose belt and repair set are included with each kite!

*EXPECT 10 DAY + ON DELIVERY VIA UPS - CONTACT US FOR DETAILS. TEL: 0427098270


FEATURES

Triple-X Canopy -52 G/M2

• 52 g/m2.

• Supplied by Techfiber, Japan.

• Designed & manufactured in Japan.

• The double sided coating results in longer lasting performance.

• Manufactured with Toray High Tenacity Polyester Yarn.

• Contains a PFOA free water repellency layer.

• The canopy is cut by laser for unmatched precision.
  
  LEADING EDGE & STRUTS
  
  

  The leading edge, struts and part of the fusion frame are made with Code155P Dacron

  • 142 g/m2.

  • Supplied by Challenge, US.

  • The dacron is cut by laser for unmatched precision.

  
  
  FUSION FRAME
  
  
  

The illustration visualizes the kite with the canopy made transparant.

LEGEND
Gray = Inflatable Frame (LE + Struts) = Code 155P, 142 g/m2
Red = Fusion Canopy = 95 g/m2
Blue = TE dacron = Code 155P, 142 g/m2
Yellow = Anti Scuff, PVC
Cyan = Vibration Damper Code 155P with EVA foam
Green = TE reinforcement = Code 155P with monofilm

Fusion Frame; the 52 g/m2 canopy is sewn in the Fusion Frame to make the kite more durable.

At LE side the canopy is sewn to the Fusion frame which is further reinforced with an insignia tape before the canopy is sewn to the LE.


At TE side the canopy is sewn to the Fusion frame which is then sewn to dacron which, at the end, is reinforced with insignia. The final 8mm is then folded creating a stiff, strong and wear resistant 2 layer dacron+insignia TE.

SMART SEAM

The Ventum Smart (closing) Seam is unique. Using M18 thread (thicker than standard), each segment of the closing seam is separately closed with 3cm overlap on both sides using the same holes. This method is more work but the result is that the main seam is double strength where the LE segments join, without adding more holes in the material.

The industry standard method is to use M20 thread and sew tip to tip. On segment joints the thread is known to breaks sometimes and therefore a double seam is sewn behind the main seam. This does however not prevent the main thread from breaking, it just acts as a backup seam when the main seam breaks. 

 

FUSION CANOPY

• 95 g/m2.

• Supplied by Techfiber, Japan.

• Designed & manufactured in Japan.

• Manufactured with Toray High Tenacity Polyester Yarn.

• Contains a PFOA free water repellency layer.

• The fusion canopy is cut by laser for unmatched precision.
  
  
  

• 80 MICRON TPU BLADDER
  
  
  

  • Thickness of 80µm.

  • Supplied by Covestro, Germany.

  • Made of a UV stabilized Ether based TPU.

  • The bladder seals are HF welded.

  • The bladder valves are HF welded using a German glue foil for consistent bonding and quality.
    
    Bridle Specs
    The Mute comes with a 4 point (double C) bridle.
    
    
    

    • Bridle lines (black in the illustration):

      • BT-450-99+, BraidTech, The Netherlands

      • 1.5mm Dyneema SK99, 12 braided, 450kg average breaking strength.

      • Extreme low elongation: 0.8% at 25% BS / 1.3% at 50% BS / 1.8% at 75% BS 

      • Proprietary coating for exceptional durability and minimum shrinkage.

    
    

    • Pigtail lines (red & blue in the illustration):

      • OL-965, Teufelberger, Austria

      • 2.7mm, 12 braided, 965kg average breaking strength.

    
    MAX FLOW & SINGLE PUMP
    
    
    

  
  

  • Inflate the kite in one shot by just using the Direct Connect Inflate.

  • Less effort on inflating due to large diameter valves and tubes.

  • Fast deflate when packaging.
    
    
    SCUFF GUARDS
    
    
    
    

  
  

  • The scuff guards provide the optimal wear resistance on the most exposed areas of the kite.

  
  
  WINGTIP STORM DEFLATE
  
  
  

  • Allows packing the kite in one go.

  • Avoids frontal sand blasts during packing.

  • Keeps the “Direct Connect Inflate” free from sand.
    
    
    WEIGHT PER SIZE
    

    Below weights are estimates, will be updated after launch.

    • 5 – 2.35 kg

    • 6 – 2.58 kg

    • 7 – 2.78 kg

    • 8 – 3.05 kg

    • 9 – 3.28 kg

    • 10 – 3.49 kg

    • 11 – 3.68 kg

    • 12 – 3.86 kg

    
    

  NFC BOOOMTAG
  

  
  

  The MUTE V1 has an integrated NFC tag which is programmed on the Booomtag platform.

  • WHAT ITS NOT ?

    • It is not a GPS tracker to find your stuff.

    • It is not a chip that collects data from you to sell to third parties.

    • It is not an electronic device that contains a battery.

  • WHAT IS IT THEN?

    • A NFC tag can be read with any modern smartphone.

    • Each tag has a unique identifier just like a serial number on the products.

    • In this case the tag is programmed for the Booomtag platform.

    • After scanning the tag you will see information regarding the product like, name, version plus, if you want, user defined information.

    • You can register your product for free on the Booomtag platform under your free account with all your other products that have the tag.

    • You first get privacy settings which you can adjust at any time.

  • WHAT DOES IT DO FOR YOU?

    • If your Ventum product gets stolen or lost, you can indicate this in your account. As of then the tag will not show the standard information but a clear message that the product is reported as lost with the action buttons you choose (call, sms, mail).

    • Others cannot get your name, number, or address by reading the tag. There are situations and professions where that may be preferred.

    • You can show ICE (in case or emergency) numbers when someone reads the tag.

    • You can show important medical information when someone reads the tag.

    • You can receive information regarding recalls or other safety information.

    • If you give permission, you will receive information about upcoming upgrades, replacement offers and maintenance advice.

  • WHAT DOES IT DO FOR VENTUM?

    • The tag gives each product a unique identification number which helps to identify affected products in case of manufacturing defects.

    • The tag allows us to stay in touch! Ventum does not send general newsletters by mail but with your Booomtag account you can register to receive information and offers related to your products and situation.
    
    
    

  STEER ADJUST
  
  
  

  • The Reef offers 3 options to increase/decrease bar pressure and turning speed.

  
  
  LINE DEFLECTORS
  
  
  
  

  • • Line deflectors reduce the chance on line wraps.
      
      SAFE CONNECT
      
      
      
      

      • Frontline pigtails end with knots.

      • Backline pigtails end with loops.

      • Left side pigtails are red.

      • Right side pigtails are blue.